首頁

山東博匯紙業股份有限公司鍋爐煙氣脫硝

臭氧產能:2套30kg/h

關鍵詞：

分類：

電話：

產品描述

臭氧氧化脫銷工藝

工作原理

在煙氣溫度100-200°C的工況下,利用臭氧和催化氧化裝置將低價態.不溶于水的氮氧化物氧化成高價態.易溶于水的氮氧化物,再通過洗滌液噴淋吸收工藝將氮氧化物吸收掉。
when the flue gas temperature reaches 100-200°C,ozone and catalyticoxidation device make low state nitrogen oxide in the flue gas which isinsoluble in water to be oxidized into nitrogen oxide which is soluble inwater,and then nitrogen oxide will be adsorbed by alkaline washingprocess.

適用領域

火電廠,熱電廠、焦化廠,石油煉化廠、工業窯爐、工業鍋爐、垃圾焚燒廠、生物質發電廠
Thermal power plant, power plant, coking plant, oil refinery, industrialfurnace，industrial boiler，waste incineration plant，biomass powerplant.

技術特點

在煙氣溫度100-200°℃的工況下使用,不需增高煙氣的溫度,節約能源;
臭氧分解后變?yōu)檠鯕?無二次污染,不使用氨等還原劑,無氨逃逸問題;
在NOx含量和煙氣量都不穩定進氣條件下,維持90%以上的去除率;
不受煙氣中粉塵影響,可以配合脫硫進行一體化洗滌,同時可脫除汞等重金屬;
使用壽命長,脫硝系統設備按15年使用壽命設計,且工藝中無催化劑更換。
works under the condition of 100-200°C flue gas temperature withoutincreasing flue gas temperature to achieve energy conservation.
Ozone is decomposed into oxygen without second pollution;do not useammonia and other reducing agents to avoid ammonia escape problem.
Clearance rate is higher than 90% even if the NOx content and flue gasvolume are not stable.
lt is not influenced by dust in the flue gas. Ilt can be combined withdesulfurization to do integrated washing, while the heavy metal mercurycould also be removed.
Denitrification system life time is designed with 15years withoutreplacing catalyst.